uxcell394mil 10mm 16.36sqft Car Exhaust Muffler Heat Sound Deadener Insulation Mat Sound Deadening Mat Aluminum Foil Foam for Hood Fender 60" x 40"

I was referred to this product through the vanlife Facebook group. This is my third purchase of this product for use in my camper van. It is cheaper than the square sound dampening panels that you roll to adhere. And these have the added benefit of being insulative. I converted a minivan and used this on all the outer wall surfaces and in my trunk space before adding another layer of Havelock wool insulation. I noticed an effect right away after I had gutted the interior of my van down to the bare metal. Hardly any road noise and no 'jingling' could be heard while driving even prior to building out the interior. Definitely recommend for all my fellow van-lifers! One tip... make sure you wear gloves when applying this. The adhesive is super strong it's a pain to remove it from your bare skin!

I replaced the engine in my 1990 Ford Bronco in Late 2024. During the install, I needed to replace the worn our heat insulation that covers and protects the AC condenser from the heat of the engine. The old material was similar to that of this product. I purchased this material and was able to cut and stick this product perfectly where it was needed in the engine compartment. It was easy to work with and the adhesive is super strong. It should last for many years! Great product!

The product is good, but the folding method makes the mat uneven.

Squrrels destroyed original underhood insulation mat on my friend's car and she asked me to help to replace it.I checked prices for OEM part, it was too high. I looked for another solution and found this mat.It cost $36, not few hundreds. With the adhesive backing it was very easy to install. It has good temperatureand noise insulation. Now after 3 years it still looks like new and squirells don't touch it. My friend isreally happy with it.

Thick insulation, braided insulation tape. Great product, just not as big as I would like it to be for the price

Have not installed yet but not straight on the ends so will have to cut in straight just to start and it is ALREADY Short??? 4 and 3 inches both ways??? A Good company will ALWAYS give you a little extra for your projects, so tells me a LOT about this company.....Looks like a decent product, thick and seams tough enough, but very badly wrinkled on foil side, came folded not in a roll as any Good company does with anything that needs to be flat as the manufacturer intended!!! Rating not based on performance. Now the rating about some of the performance. The sticky side is NOT very sticky and the adheasive part comes right off so won't stay down. where I used it I tucked under areas where I could and that helped also I use several layers and that helped keep it down. Works very well for sound deadening just needs better adheasive and on a roll as their Pictured Ad Shows, NOT Folded!!!

Item will not stick to hood! I cleaned surface well before installing with alcohol and let dry! It stuck well for the first few days then began to fall off into engine bay!

Used this to line the engine bay of an older 2 stroke gas golf cart. Very heat resistant and kept alot of the heat from the seat and or legs. With the adhesive backing it was very easy to install. It also cut some of the engine noise down. Great value for the money as far as I'm concerned. There was a little odor to it when I first opened the package but, in my application it doesn't really matter and it quickly went away.