Muzata 10Pack 3.3FT/1M LED Channel Aluminum U Shape Silver LED Strip Diffuser Channel with Milky White Cover Easy Installation U1SW WW 1M

The package includes clips and screws to hold the aluminum channel pieces in place. The Most Fun part of installing is laying on my back and drilling pilot holes in the bottom of the upper cabinets. The little clips work perfectly to hold the channel sections in place. The kit comes with covers and end pieces for the channels, including holes for wire access.My original LED installation suffered from some overheating at mid-strip junctions, eventually causing breaks and dark sections in the under-cabinet LED strips. I've been progressively upgrading the various rooms with aluminum channel for the strips, so the aluminum might do a better job carrying and dissipating local strip heat. This kit was for the third room install, with the heat-dissipating function already proven. This channel kit has a significant advantage over the deeper channel kits I used for the first two-- the available light distribution is much less limited by the channel walls.I'm only part way through this part of the installation at this point. If there are changes I'll update the review. So far though, I/m happy with the product and the results.

Used for under kitchen cabinet lighting. Very easy to install. Very professional look. I used 2835 3000K led light. The nonsolder clip style strip connector for 2835 fit very nice in tray. The 5050 clip style to large to fit in tray, however the 5050 led strip does fit well. Could still work fine but not as elegant as the clip in the tray. Loved that half endcaps had predrilled hole to put connector wire through. End up with great "led fixture" and clip in place is great. If you want to trial your light position under cabinet for the light effect, very easy to do, or if you want to relocate very easy as well. I installed with the diffuser on, ran trial with it on and with it off, I couldn't tell difference so put them on for ease of cleaning and just "light fixture" appearance. Can't imagine every not using these or similar product if going to trouble to light under cabinet...

These LED aluminum channels are a game-changer! They make my LED strip lights look incredibly professional and clean. The diffuser does a great job of softening the light and eliminating those annoying hotspots. Plus, I love that they help with heat dissipation, which should make my LEDs last longer. Easy to install and totally worth it for a polished, high-end look. The plastic diffuser can be a bit tricky to click into place.

Good quality. Works as expected. Would buy again

Perfect diffuser strips for Govee strip lights. Fairly easy to install. I used the screws so it's permanent. It looks very good. Yes you can still see LED dots. No product really perfectly diffuses. It gives a professional look. Allows you to look at the light strip without being blinding. So many reviews don't understand this. Can be a little tricky at corners but take your time and you can have a clean install with minimal effort.

Appears to be decent quality aluminum channel and diffuser however the reason for 3 star is back to lack of chinese QC as usual. First time trying this brand for an undercounter kitchen lighting install; plan on further update after completed and tested.Channels are 1M in length and hardware kit is also included for mounting of the channels. In a past life I have installed and managed teams for professional telecom installations and secure sites around the country - have just a bit of knowledge for installations requiring 99.999% up time. The company would send installation packs to save time and costs and one thing you did not want to be short on were the nuts and bolts that literally were needed to install correctly and professionally. For these 1M strips I would want to place NO FEWER than 3 clips per strip (preferably 4) however this pack has 25 clips, 20 screws, 10 endcaps, 10 endcaps with holes. For 10 channels and 10 diffusers - at least the end caps match assuming none of the channels are cut to length for the application. The 25 mounting clips with only 20 screws is a bit confounding and if the clips were a standard type part available locally it would just be a frustrating trip to a store with lost time but not the case here. Will likely end up just drilling straight into the channel for mounting after going to the store to acquire more screws for the manufacturers lack of QC.UPDATE: As expected, not enough mounting clips. The diffuser works well but had to make a trip to the hardware store to pick up a pack of 100 screws. The clips make a small gap that helps with heat dissipation but ended up placing 2 clips and added screws at ends by drilling through the metal track making a solid connection but eliminates gap. For comparison see photo. Photo is a competitor brand but not an apples to apples comparison - the other brand is twice the track but pay attention to the hardware, you can see that this track (left pic) does not contain even half of the hardware of the competitor brand (right pic).

The media could not be loaded. I really like how these look. The strips blend in well with the lights off and the look with the lights on is fantastic. You can see the individual diodes but with the thin strips I expected this but the look is nowhere near as harsh as without the channels. I could have gotten better blending with deeper channels but that come with the downside of decreased brightness and these lights serve a great purpose than just the look, they need to light the area as well. I used Command brand poster strips to mount these. I didn’t want to put holes in my patio roof. For anyone interested, I used the Tp-Link WiFi LED strip for this. It’s also sold on Amazon.

Very easy to install. Made my sons day with this simple upgrade to his led light.