RenogySolar Panel Side of Pole Mount for 50W/100W Solar Panel (Mount only) for Flat Surface Off-Grid Systems, and Panels Up to 100W

This is a great solar panel mount for the price. I bought two of them for a remote transmitter project. Highly recommend.

EXCELENTE ARTICULO.100% RECOMENDABLE.

Good mount for solar panels up to 100W rating or a bit higher wattage rating (the new Renogy most excellent 120W Anti-Shading 12V N-Type ShadowFlux solar panel fits on this mount just fine, for example...); I have purchased three of them so far from Amazon.However, I have encountered one problem, a problem that many other reviewers have mentioned occurred for them as well, and that is missing hardware from the hardware bag. In my case, one of the mounting kits had one item missing from the hardware bag; the missing item was one M8 T-Bolt (F), as it is named on the parts list, which happens to be a very critical part.So, Renogy, you owe me either one of those M8 T-bolts, or an entire new panel mount kit, because the missing part means that I cannot use the mount! Please reply to my review here, or to my Amazon account directly, and I will give you my shipping information, etc., or feel free to ask Amazon to ship me a new mounting kit to replace the one with the missing part. Thank you in advance for handling this matter promptly!

I used these mounts to install my two Newpowa 100Watt Solar Panels to an existing pole. The mounts are well built and solid. Don't be overwhelmed by all the bolts, nuts and washers; follow the instructions and you'll be able to assemble these mounts in short order.When I first assembled the mounts I was concerned that I wouldn't be able to use them with my panels. The Newpowa panels are large square panels which differ from other 100Watt panels which are rectangular. This seemed to be a problem because they were a bit too wide to securely mount without the charge block on the back of the panel butting up against the cross beam. After some remeasuring and reorienting the panels I was able to mount them and they have been working perfectly for the last several weeks.The U bracket is very large so I had to install a 2x4 on the pole to give it enough girth to secure the U bracket in place and prevent the whole assembly from spinning. I am very happy with the end result and the solar panels are properly aligned with the sun. One thing to keep in mind adjusting the angle is time consuming as you have to manually torque each bolt when adjusting the angles. I suggest slightly tightening them until you have the angle you want then go back and torque down each bolt.

First one showed up missing parts and lots of the nuts and bolts. Replacement one shipped with the 28 washers way too small for the M8 bolts shipped. Have to run and buy washers now 👎👎👎

Missing multiple T-bolts, washers, nuts. Renogy needs to do better so time is not wasted waiting on parts.

I recently made a decision to install a small off grid solar system to supply my basic electrical needs. While I have had years of experience working with electronics. I was a complete novice when it came to generating electricity with solar panels. As such I choose to start my learning process with one 100 watt Renogy monocrystalline solar panel.Having an iron pipe already in place from an unused satellite dish. The perfect solution for mounting my new solar panel appeared to be by ordering the Renogy pole mount available here on Amazon. The pole mount arrived on time and well packaged in a 32" x 5" x 3" box. The assembly and installation manual was quite detailed including a parts list and drawings. All necessary hardware for assembly and mounting on the pole was included. Please note that you will need a few hand tools to complete the installation which are not supplied. The Renogy pole mount consists of aluminum and stainless steel except for the two 4" U-Bolts, washers and nuts which attach the mount to the pole. I completed the installation by myself without help. First by attaching the mount to the pole and then mounting the solar panel onto the pole mount using the supplied hardware. The completed installation is quite stable and has already weathered 50+ mph wind gusts.As an added plus I have found that by turning the solar panel on the pole to face the sun during the day. I can significantly increase the amount of watts generated each day. I am using this 100 watt off grid system to power my Compaq laptop (25-30 watts), a 2014 Vizio 32 inch smart TV with backlight set as low as possible (20 watts) and several very low wattage LED's (total 11 watts) for lighting. On sunny days I have no shortage of power using either the laptop or TV well into the night. Though I try not to use both at the same time! In the future I hope to replace my laptop with a more efficient HP 14" Chromebook hopefully allowing for the addition of a SunDanzer DCR50 solar refrigerator.I am quite happy with the Renogy pole mount and would certainly buy it again!

The hardware package had only 9 M8 Cap Head Bolts, should have had 10. Not the end of the world, but it was an aggravation non-the-less. Main reason for the 3/5 rating was the difficulty in fastening the T-Slotted Brackets to the L-Bracket with the M8 T-Bolts. The holes in the L-Bracket for the M8 T-Bolts need to be relocated further out ...to allow more room for attaching and securing the M8 T-Bolt nuts. (Barely enough clearance from the protruding M8 Cap Head Bolt Nuts that secure the L-Brackets to the L-Channel to allow for attaching and securing the M8 T-Bolts.)To make matters worse, one of the T-Slotted Brackets was crushed on one end from shipping damage. Somewhere during shipping, this was hit hard or run over by something heavy. Would have sent it back for a replacement, but I needed the Pole Mount pronto for mounting my panel.The basic design for this product is good and the assembly is doable as is. It just needs some massaging for clearance issue that I mentioned. The damage to the product was totally on shipping.