YOYI YOYI ABS 3D Printer Filament, ABS Filament 1.75mm Dimensional Accuracy +/- 0.03mm, 1kg Spool (2.2lbs), ABS Black

***Update ***I have finally got this adhering to the bed, I purchased 3DLac and that is working well with this ABS, now I am getting very good results printing it.I upgraded the stars to 4 star not 5 due to the fact that I have had to go out and buy 3DLac just for this material. Any other bed adhesion solution did not work for me.Now I am very happy with the results I am getting.** Original Review **I love the silver color of this but I have tried everything i would normally use for bed adhesion, I tried plain glass, phenolic sheet, pei sheet on glass, gluesticks, diluted pva, hairspray even PG which works wonders with petg and pla on a phenolic sheet.My printer is enclosed and i tried bed temps ranging from 70 - 110 and hotend temps from 230-260. i even lowered my speeds to as low as 15mm/sI have even put it in my dryer for a full 4 hours just in case but there was no sign of it being damp.nothing works.I cannot get this to stick to the bed, best i got was layer 3 before it broke free :(best off spend your money on a more reputable brand

This is NOT ABS Plus as advertised. The box is labeled as normal ABS. The spool is labeled as normal ABS. Had to print it at 255 / 110 the same as normal ABS, and its the worst smelling ABS I've used in over a year.If I didn't need to print something quickly I would have returned it for a refund. Very bad form from YOYI.Giving it 2 stars since it does at least print, assuming you have a full enclosure. If you are after some actual ABS Plus that is easier to print and doesn't stink, look elsewhere.

Thickness (diameter) seems fine.On first print on a glass heated bed (100 degrees C) it xame unstuck so ended up with a smelly blob on my hot end.Second attempt with glue stick worked but still getting warping, so have tried using brims. The adhesion is quite poor.My first ABS filament and I previously used PLA and PETG. This ABS filament stinks, and gives me a headache even with a fan and the window open.The finish looks nice, good colour, no cracks, but I can't use it. Would return but I've had it in the sealed bag fr so long and just started using it.

check the picture ive posted this was halfway down a spool and was also halfway through a week long print, i'm so pissed at the moment as this print is huge and im gonna have to start it again and the cost to me for time, labour, wasted filament and electricity are things im never going to get back.if it not obvious thats two rotations of the coil through that erroneous loop and what didn't help is that the first one was buried in the other strands so even if it hadn't caught you can bet it would have caused some under extrusion. this spool was fresh on the printer at the start of the print so there was no way it was user error

It prints ok on my creator pro best at 230c 105 bed, but its loves getting into a mess at the back when they put this on the roll they must have been on a monday morning or friday afternoon, its tangled up in a weird knot that works ok on some prints but like other prints pic included failed because of the tangle it got it self into, now ive got to untangle the knot and reset the whole print. I wouldnt recommend this to anyone doing long prints of 10 hours just incase like me end up with a half finished print because of a nice knot on the real. Yes i made sure it was good when i put the real on, its not like my carbon pla by sunlu prints like a dream with no knots.

Per other users' feedback, this is advertised as ABS+ (twice, ABS Plus). This gives the expectation it will perform better than standard ABS.It does not.-The boxes are only labelled ABS, no mention of ABS+.-It is the worst smelling ABS I have ever printed-it's very yellowish for a white filament in 2022, more like early days 'natural' ABS-even at the high end of the recommended temperature range, in an enclosure, it delaminates within the part despite good initial bed adhesion with high temperature.-it ruined my print project, 100% failure rate. Had to rebuy alternative material.

Do not buy the black ABS as it is not ABS, it does not dissolve in acetone. It also printed poorly, bubbling with little layer adhesion and it was not black but more of a light gray after being extruded.

Was nervous about ordering this reading the reviews. However was keen to get an amazing product I could get fast at a good price etc. This actually turned out perfect. I've never used abs before so this was a first. No smell, started with calibration prints on a glass bed. Tried with glue etc. No luck.Tried with homemade "abs juice" which sounds like hassle but it's actually very easy. no looking back pretty happy.Have to prise parts from the bed they are stuck that well.